Titel-Banner
 UHF18.11.2002  

UHF Radio Control Panel

Die Kommunikation der F-16 erfolgt über das Have Quick UHF Radio, das VHF Radio, das Secure Voice Control Panel und das Intercom Set. Über das UHF Radio Control Panel werden - sofern dies nicht primär über das ICP und DED geschieht, die UHF-Frequenzen eingestellt. Neben beliebig einstellbaren Frequenzen im UHF-Bereich (225.00-399.975mHz) können hier mehrere fest programmierte Frequenzen über einen Channel-Selector sowie die Guard-Frequenz (GD 243.00mHz) eingestellt werden. Das Panel ist nur dann aktiv, wenn der CNI-Switch (CNI=Communication, Navigation, IFF) auf dem Auxiliary Control Panel auf "BACKUP" steht. Das UHF Radio Control Panel befindet sich auf der Left Console.

Das Panel und seine Elemente (Have Quick I)
Das Panel und seine Elemente (Have Quick II)
Das Panel und seine Elemente (Have Quick IIa)
Bilder des UHF Radio Control Panels


Das Panel und seine Elemente (Have Quick I)

UHF


ElementTypePositionInformation
Preset ChannelRotary1 - 20Permits the selection of 1 of 14 preset frequencies (channel 1-14) with the mode knob at PRESET and the A-3-2-T knob in A and the mode knob in 2 or 3. With the A-3-2-T knob in A and the mode knob at PRESET, the preset channel knob permits the selection of one of six preset WOD (Word-of-Day) frequencies (channel 15-20)
A-3-2-TRotaryASelects AJ (antijamming) mode
3Select 3__,___ frequence position
2Select 2__,___ frequence position
TMomentary position wich enables the radio to accept a new TOD (Time-of-Day) for up to 1 minute after selection. Also used in conjunction with the emergency startup of the TOD clock when TOD is not wavailable from external sources
Manual FrequencyRotary1 - 9Select _X_,___ frequence position
Rotary1 - 9Select __X,___ frequence position
Rotary1 - 9Select ___,X__ frequence position
Rotary0, 25, 50, 75Select ___,_XX frequence position
FunctionRotary switch
(4x30 deg)
OFFPower Off
MAINWidth COMM1 power switch on, UHF operates on selected frequency
BOTHNormal operation plus receiving on guard frequency
ADFNot operational
TONEButton Depressing in normal or AJ (antijamming) mode will interrupt reception and transmit a tone signal and TOD for HQ (Have Quick) on the selected frequency. Simultaneously pressing the TONE button in conjunction with the A-3-2-T knob in T position starts the emergency startup of the TOD clock.
VOLRotary pot0 - ...Not operational. Volume can only be controlled by the COMM 1 (UHF) power knob.
SQUELCH2-Way switchOFFDisables squelch circuit to permit reception of a weak signal
ONEnables squelch circuit which help to eleminate background noise in normal reception
ModeRotary switch
(3x30 deg)
MANUALUHF frequency is selected by manually setting the five frequency knobs
PRESETUHF frequency is determined by the preset channel knob
GUARDThe main receiver and transmitter are automatically tuned to the guard frequency and the guard receiver is disabled
GD SQ (Behind
Channel Card)
Rotary pot0 - ...Ground communication squelch?
MN SQ (Behind
Channel Card)
Rotary pot0 - ...Minimum squelch?
PRESET (Behind
Channel Card)
Button-Set WOD (Word-of-Day) in flight. For a new WOD frequency entry, start at channel 20 and use the same method as in entering preset frequencies in the normal mode. The WOD frequency is set with the manual frequency knobs and the PRESET button. After a brief pause, a single or double beep tone is heard in the headset indicating that channel 20 is entered into preset memory. Channels 19-15 are selected in that order for preset frequency entry.
WB NB BW (Behind
Channel Card)
Rotary pot0 - ...?

Anmerkung:
Die obige Panelzeichnung ist Bestandteil einer Cockpitzeichnung, die du auf meiner Seite Dokumente, Pläne und Checklisten der F-16 herunterladen kannst.


Das Panel und seine Elemente (Have Quick II)

UHF


ElementTypePositionInformation
Preset ChannelRotary1 - 20Permits the selection of 1 of 14 preset frequencies (channel 1-14) with the mode knob at PRESET and the A-3-2-T knob in A and the mode knob in 2 or 3. With the A-3-2-T knob in A and the mode knob at PRESET, the preset channel knob permits the selection of one of six preset WOD (Word-of-Day) frequencies (channel 15-20)
EMBLight/Button? ?
A-3-2-TRotaryASelects AJ (antijamming) mode
3Select 3__,___ frequence position
2Select 2__,___ frequence position
TMomentary position wich enables the radio to accept a new TOD (Time-of-Day) for up to 1 minute after selection. Also used in conjunction with the emergency startup of the TOD clock when TOD is not wavailable from external sources.
Manual FrequencyRotary1 - 9Select _X_,___ frequence position
Rotary1 - 9Select __X,___ frequence position
Rotary1 - 9Select ___,X__ frequence position
Rotary0, 25, 50, 75Select ___,_XX frequence position
FunctionRotary switch
(4x30 deg)
OFFPower Off
MAINWidth COMM1 power switch on, UHF operates on selected frequency
BOTHNormal operation plus receiving on guard frequency
ADFNot operational
TONEButton Depressing in normal or AJ (antijamming) mode will interrupt reception and transmit a tone signal and TOD for HQ (Have Quick) on the selected frequency. Simultaneously pressing the TONE button in conjunction with the A-3-2-T knob in T position starts the emergency startup of the TOD clock.
VOLRotary pot0 - ...Not operational. Volume can only be controlled by the COMM 1 (UHF) power knob.
SQUELCH2-Way switchOFFDisables squelch circuit to permit reception of a weak signal
ONEnables squelch circuit which help to eleminate background noise in normal reception
ModeRotary switch
(3x30 deg)
MANUALUHF frequency is selected by manually setting the five frequency knobs
PRESETUHF frequency is determined by the preset channel knob
GUARDThe main receiver and transmitter are automatically tuned to the guard frequency and the guard receiver is disabled
GD SQ (Behind
Channel Card)
Rotary pot0 - ...Ground communication squelch?
MN SQ (Behind
Channel Card)
Rotary pot0 - ...Minimum squelch?
PRESET (Behind
Channel Card)
Button-Set WOD (Word-of-Day) in flight. For a new WOD frequency entry, start at channel 20 and use the same method as in entering preset frequencies in the normal mode. The WOD frequency is set with the manual frequency knobs and the PRESET button. After a brief pause, a single or double beep tone is heard in the headset indicating that channel 20 is entered into preset memory. Channels 19-15 are selected in that order for preset frequency entry.
WB NB BW (Behind
Channel Card)
Rotary pot0 - ...?

Anmerkung:
Die obige Panelzeichnung ist Bestandteil einer Cockpitzeichnung, die du auf meiner Seite Dokumente, Pläne und Checklisten der F-16 herunterladen kannst.


Das Panel und seine Elemente (Have Quick IIa)

UHF


ElementTypePositionInformation
CHANDisplay2 DigitsDisplay the selected channel
Preset ChannelRotary1 - 20Permits the selection of 1 of 14 preset frequencies (channel 1-14) with the mode knob at PRESET and the A-3-2 knob in A and the mode knob in 2 or 3. With the A-3-2 knob in A and the mode knob at PRESET, the preset channel knob permits the selection of one of six preset WOD (Word-of-Day) frequencies (channel 15-20).
TEST DISPLAYButton-After press the button the frequency display is tested
Frequency/StatusDisplay6 DigitsDisplay the selected frequency
STATUSButton-After press the button the current status is display
A-3-2RotaryASelects AJ (antijamming) mode
3Select 3__,___ frequence position
2Select 2__,___ frequence position
Manual FrequencyRotary1 - 9Select _X_,___ frequence position
Rotary1 - 9Select __X,___ frequence position
Rotary1 - 9Select ___,X__ frequence position
Rotary0, 25, 50, 75Select ___,_XX frequence position
FunctionRotary switch
(4x30 deg)
OFFPower Off
MAINWidth COMM1 power switch on, UHF operates on selected frequency
BOTHNormal operation plus receiving on guard frequency
ADFNot operational
TONE2-Way switchTMomentary position wich enables the radio to accept a new TOD (Time-of-Day) for up to 1 minute after selection. Also used in conjunction with the emergency startup of the TOD clock when TOD is not wavailable from external sources.
TONEDepressing in normal or AJ (antijamming) mode will interrupt reception and transmit a tone signal and TOD for HQ (Have Quick) on the selected frequency.
VOLRotary pot0 - ...Not operational. Volume can only be controlled by the COMM 1 (UHF) power knob.
SQUELCH2-Way switchOFFDisables squelch circuit to permit reception of a weak signal
ONEnables squelch circuit which help to eleminate background noise in normal reception
ModeRotary switch
(3x30 deg)
MANUALUHF frequency is selected by manually setting the five frequency knobs
PRESETUHF frequency is determined by the preset channel knob
GUARDThe main receiver and transmitter are automatically tuned to the guard frequency and the guard receiver is disabled
MN SQ (Behind
Channel Card)
Rotary pot0 - ...Minimum squelch?
ZERO (Behind
Channel Card)
2-Way switchOFF?
ON?
LOAD (Behind
Channel Card)
Button-Set WOD (Word-of-Day) in flight. For a new WOD frequency entry, start at channel 20 and use the same method as in entering preset frequencies in the normal mode. The WOD frequency is set with the manual frequency knobs and the PRESET button. After a brief pause, a single or double beep tone is heard in the headset indicating that channel 20 is entered into preset memory. Channels 19-15 are selected in that order for preset frequency entry.
GD SQ (Behind
Channel Card)
Rotary pot0 - ...Ground communication squelch?
FILL (Behind
Channel Card)
Connector6 pins?

Anmerkung:
Die obige Panelzeichnung ist Bestandteil einer Cockpitzeichnung, die du auf meiner Seite Dokumente, Pläne und Checklisten der F-16 herunterladen kannst.


Bilder des UHF Radio Control Panels


Have Quick IIa

Have Quick IIa

Have Quick IIa

Have Quick IIa

Have Quick IIa

Have Quick IIa

Have Quick II

Have Quick II

Have Quick II

Have Quick II

Have Quick II

Have Quick II

Anmerkung:
Zum Vergrössern bitte mit der Maus auf das gewünschte Bild klicken.

Quellen:
Bild Nr. 12 wurde von Kostas Kefalas zur Verfügung gestellt.


 Home  Original  Parts  Left Console(c) by Martin "Pegasus" Schmitt